Hiti P910L User Manual Uživatelský manuál

User Manual HiTi P910L Digital Photo Printer EN

Chapter 2. Installing and Set Up 7  USB Connector To be used to connect the USB cable.  Paper Setting Lamp When setting the paper, insert the pa

Chapter 2. Installing and Set Up 8 Fixing Anti-tip Plate 1. Use a Phillips screwdriver to fix the anti-tip place to the back of the printer. 2.

Chapter 2. Installing and Set Up 9 Warning: When moving the printer, make sure to turn off the power of the printer, remove the power cable in orde

Chapter 2. Installing and Set Up 10 Setting Ink Ribbon １． Remove dust box. ２． Carefully lift the drawer lever and pull the drawer unit.

Chapter 2. Installing and Set Up 11 ４． Take the slack ink ribbon by turning the ink ribbon supply core. Loading Paper Turn on the power

Chapter 2. Installing and Set Up 12 Caution: The paper is not set correctly if there is a gap of about 5mm ~ 10mm between the paper flange and pa

Chapter 2. Installing and Set Up 13 5. Close the open guide unit. When close the open guide unit, press on the center of the open guide unit.

14 Chapter 3. Routine Maintenance Cleaning of Thermal Head, Platen, and Decurl Roller By using thermal transfer technology, daily maintenance is not

Chapter 3. Routine Maintenance 15 3. Using gauze dipped with isopropyl alcohol or ethyl alcohol, clean the rubber section of the platen roller.

Chapter 3. Routine Maintenance 16 Cleaning of Filter If the dust collects on the openings, clean it with vacuum cleaner.

Handling of this Manual 1. All rights reserved. No part of this user manual covered by the copyright herein maybe reproduced or copied in any for

17 Chapter 4. Error Handling Printer Status lamps are displayed in red When the error happens, the details of the error can be confirmed with the pri

Chapter 4. Error Handling 18 Failure Symptoms When detecting a failure symptom, check the printer using the following table. Symptom Action Power i

Chapter 4. Error Handling 19 3. Open the open guide unit. 4. Pull out the paper until the paper setting lamp goes off. Attention: ・ If the p

20 Chapter 5. In order to more comfortably use Paper Pre-Cut function can be turned off through the printer driver. Caution: Dust on the surface of

Chapter 5. In order to more comfortably use 21 For the Customers in the U.S.A. FCC WARNING Changes or modifications not expressly approved by the

22 Specification Product name HiTi Digital Photo Printer Model name P910L Printing method Dye sublimation thermal transfer Resolution 300 dpi Pr

Content Chapter 1. Important Safety Instruction ... 1 Environments...

1 Chapter 1. Important Safety Instruction This manual provides detailed instructions for the safety use of the printer. Read this manual before op

Chapter 1. Important Safety Instruction 2 Caution: Do not place the printer on rickety place and/or inclined place. Printer may fall down or tumbl

Chapter 1. Important Safety Instruction 3 Warning: In case you drop the printer, firstly turn off the power of the printer and remove the power ca

Chapter 1. Important Safety Instruction 4 Handling Instruction for Consumable and Printed Output In handling the ink ribbon, paper and printed outp

5 Chapter 2. Installing and Set Up This chapter explains the unpacking and set up of the printer. Before proceeding to this chapter, please make s

Chapter 2. Installing and Set Up 6 Parts Name and Function (Front View) (Rear View) (Front Internal View) (Upper Internal View) № Name Fu